Silux Control SC-TL01, Operation Manual

Page: 6 / 12

III. Replacing the AAA 1.5V batteries:
There will be two AAA batteries supplied with the product. The two
batteries will have a life span of 1 to 2 years,nd how often the
Tylten Pro
®
is triggered.
1. Open the plastics by removing the ‘change battery’ sticker and
unscrewing the lid
2. Pop out the two old AAA batteries and replace it with two new
AAA batteries. The Tylten Pro
®
will now be powered on.
3. Place the lid over the plastic and screw back tightly.
*Please Note: It’s not necessary to pair the Silux Control
®
devices
again after replacing the batteries.
IV. How to pair with Silux Control
®
Devices:
1. Ensure the Silux Control
®
device you would like to pair is
powered on. Press the Teach button on a Silux Control
®
device like
a Collector
®
as example, in a similar area or room to the Tylten
Pro
®
position. The light will start flashing.
2. Ensure the Tylten Pro
®
is on, then press the Teach button on the
Tylten Pro
®
. The light on the Tylten Pro
®
will start flashing.
3. The light will switch off once successfully paired. If the light
stays on for 30 seconds, the pairing was unsuccessful. Wait for the
light to go off before trying again.