CAUTION
Keep this device away from rain and moisture
Unplug main lead before opening the housing!
USER MANUAL
PAR36-RGB-12-1W-D-B
For your own safety , please read this user manual carefully before you initially start-up
Every person involved with the installation, operation and maintenance of this device has to
•
be qualified
•
Follow the instruction of this manual
•
Consider this manual to be part of the total product
•
Keep this manual for the entire service life of the product
•
Pass this manual on to every further owner or user of the product
•
Download the latest version of the user manual from the internet
INSTRUCTION
Thank you for having chosen Par 36LED-D . If you follow the instruction given in this manual, we
are sure that you will enjoy this device for long period of time
Unpack your Par 36LED-D
Before you initially start up, please make sure that there is no damage cause by transportation.
Should there is any, consult your dealer and do not use the device.
SAFETY INSTRUCTION
Be careful with your operation. With a dangerous voltage you
can suffer a dangerous electric shock when touching the wires!
This device has left our premises in absolutely perfect condition. In order to maintain this condition
and to ensure a safe operation, it is absolutely necessary for the user to follow the safety instruction
and warning notes written in this manual.
Important:
Damages cause by the disregard of this user manuals are not subject to warranty. The dealer will not
accept liability for any resulting defect or problem.
If the device has expose has been exposed to drastic temperature fluctuation (e.g after transportation), do not
switch it on immediately. The arising condensation water might damage your device . Leave the device switch
off until it reach room temperature
Please make sure that there are no obvious transport damage. Should you notice any damage on the A/C con-
nection cable or on the casing. Do not take the device into operation and immediately consult your local dealer.
This device falls under protection class 1. The power plug must only be plugged into a protection class 1
outlet. The voltage and frequency must exactly be the same as stated on the device. Wrong voltage or power
outlets can lead to the destruction of the device and to mortal electric shock.
Always plug in power plug last. The power plug must always be inserted without force. Make sure that the
plug is tightly connected with the outlet
Never let the power cord come into contact with other cables! Handle the power cord and all connection with
the mains with particular caution! Never touch them with wet hands, as this could lead to mortal electric shock.
Never modify, bend, strain mechanically, put pressure on ,pull or heat up the power cord. Never operate next
to source of heat or cold. Disregard can lead to power cord damages, fire or mortal electric shock
The cable insert or female part in the device must never be strained. There must be sufficient cable to the
device otherwise, the cable may be damages which may lead to mortal damage.
Make sure that the power cord is never crimped or damage by sharp edges. Check the device and the power
cord from time to time.
If extension cord are use, make sure that the core diameter is sufficient for the required power consumption of
the device. All warning concerning the power cords are also valid for possible extension cords.
Always disconnect from the mains, when the device is not in use or before cleaning it. Only handle the power
cord by the plug. Never pull out the plug by tugging the power cord. Otherwise, the cable or plug can be
damaged leading to mortal electrical shock. If power plug or power switch is not accessible, the device must
be disconnected via mains.
If the power plug or the device is dusty, the device must be taken out of operation, disconnect nd then be
cleaned with a dry cloth. Dust can reduce the insulation witch may lead to mortal electrical shock. More severe
dirt in and at the device should be removed by a specialist.
There must never enter any liquid into outlets, extension cords or any holes in the housing of the device. If you
suppose that also a minimal amount of liquid may enter the device, it must immediately be disconnected. This
is also valid, if the device was expose to high humidity. Also if the device is still running, the device must be
checked by a specialist if liquid has reduce any insulation. Reduce insulation san cause mortal electrical shock.
There must never be any object entering into the device. This is especially metal parts. If any metal parts like
staple or coarse metal chips enter into the device must be taken out of operation and disconnected immediately.
Malfunction or short circuit cause by metal parts may cause mortal injuries
During initial start up some smoke or smell may arise. This is normal process and does necessarily means that
the device is defective
HEALTH HAZARD!
Never look directly into the light source, as sensitive person may suffer an epileptic shock
( especially meant for epileptics)
Keep away Children and armature!
Never leave this device running un attended
