14
English
Undo the screw at the bottom panel of the
Applicator.
Lift and remove the top panel of the Applicator.
Cut the tow wires that connect the electronics card
to the lower panel of the Applicator.
Push the three snaps and pull out the electronics card.
Cut the tow wires that connect the rechargeable
batteries pack to the Applicator.
Troubleshooting
Solution
Possible Cause
Problem
Charge the Applicator
The rechargeable
batteries are empty
Silk’n Clear does
not work
Contact your local Silk’n customer Service
Center
The Applicator is
Broken
Charge the Applicator
The rechargeable
batteries are empty
Silk’n Clear suddenly
switches off
No action is required
This is normal
Device temperature
rises during recharge
This chapter summarizes the most common problems you could
encounter. If you are unable to solve the problem with the informa-
tion below, contact your local Silk’n Customer Service Center for
further support.
