![Silit Sicomatic t-plus Instructions For Use Manual Download Page 4](http://html1.mh-extra.com/html/silit/sicomatic-t-plus/sicomatic-t-plus_instructions-for-use-manual_1272127004.webp)
39
Important safety instructions
Only use the pressure cooker on suitable
cookers, the heating methods of which are
listed in the instruction manual.
Never heat up when empty, unattended or
on the highest setting and observe the
cooker manufacturer’s instruction manual to
avoid overheating and damage to cooking
utensils, especially in the case of induction
cookers.
As soon as steam is released, switch down
the power.
When releasing steam please always keep
your hands, head and body away from the
danger area over the middle of the lid.
Please observe this especially in the case of
releasing steam via slide control.
The pressure cooker must not be used
without or with too much liquid. Non-observance can
result in serious damage. Please adhere
strictly to the specified filling quantities
(cf. pg.41).
During use never touch the hot outer
surfaces of the cooker, only the two handles
and lid handles. During use the outer surfaces
of the Sicomatic t-plus can heat up to 130°C.
When the pressure cooker is filled with hot
contents it must be carried with a sure and
firm grip, held only by the handles and lid
handles. If necessary use oven gloves.
Never leave the pressure cooker unattended
during use, especially if children are in the
vicinity.
When heated excessively the water can
evaporate in an explosive manner in the
opened pressure cooker and cause serious
burns. Please therefore always shake
briefly before opening.
Non-observance of the cleaning instructions
may result in malfunctions on the
Sicomatic
®
t-plus.
Never open the pressure cooker by force
and do not change safety devices! The
pressure cooker can only be opened easily
when pressureless.
Stainless steel:
glass electro gas induction
ceramic
e30/Silargan
®
/Silit steel
®
glass electro gas induction sensor
ceramic
036_054_Sico t-plus en_231110.qxd:036_054_englisch_04_07.qxd 25.11.2009 8:14 Uhr Seite 2