This model
NOT NEED
any calibration.
HOW TO SET UP THE FREQUENCY?
By using a screwdriver, put it in the hole of the key ring and by
leveraging on the edge of the radio control, remove the metal
stop, after that raise the cover, remove the dead battery and
insert the new one paying attention to the correct polarity.
The remote control is powered by a MOD. 23A DA 12V
Remove a dead battery and insert the new one paying
attention to the correct polarity.
HOW TO REPLACE THE BATTERY?
WARNING
:
Do not disperse the old battery into the environment,
but dispose it in dedicated waste container.
CLONE 433 AU 2T
PROGRAMMABLE REMOTE CONTROL
