Setting the channel map
The channel map is a non-volatile configuration option that is used to set the channel to frequency
table, to configure the channel scan table, and to optimize the auto-modulation detection.
GUI: The channel map can be set for each tuner by running HDHomeRun Config (GUI).
Command line: The channel map can be set for each tuner using the following command:
Format: hdhomerun_config <ip|id> set /tuner<n>/channelmap <channelmap>
Example: hdhomerun_config 10001000 set /tuner0/channelmap us-cable
Example: hdhomerun_config 10001000 set /tuner1/channelmap us-cable
Channel maps supported by HDHR-TECH-US hardware:
Name
Description
Location
us-bcast
Digital Antenna (ATSC).
US, Canada
us-cable
Digital Cable - Normal frequency layout.
US, Canada
us-hrc
Digital Cable - HRC frequency layout.
US, Canada
us-irc
Digital Cable - IRC frequency layout.
US, Canada
Channel maps supported by HDHR-TECH-EU hardware:
Name
Description
Location
au-bcast
Digital Antenna (Australia).
Australia
au-cable
Digital Cable (Australia).
Australia
eu-bcast
Digital Antenna (Europe).
Europe, New Zealand
eu-cable
Digital Cable (Europe).
Europe, New Zealand
tw-bcast
Digital Antenna (Taiwan).
Taiwan
tw-cable
Digital Cable (Taiwan).
Taiwan
