background image

Legal Information 

RE31 

USER MANUAL 

 

RE31 Mini Reader 

 

 

PROPRIETARY AND CONFIDENTIAL

 

18

 

USER MANUAL RE31 

 

 

11, 2020 

V1.0

 

Copyright © 2020 Silicon Craft Technology PLC 

 

7. Legal Information 

7.1 Disclaimer 
 

- The information described herein is subject to change without notice. 

- Although the IC contains a static electricity protection circuit, static electricity or voltage that 
exceeds the limit of the protection circuit should not be applied. 

- SIC assumes no responsibility for how this IC is used in products created using this IC or for the 
specifications of that product, nor does SIC. Assume any responsibility for any infringement of 
patents or copyrights by-products that include this IC either in Thailand or in other countries. 

- SIC is not responsible for any problems caused by circuits or diagrams described herein whose 
related industrial properties, patents, or other rights belong to third parties. The application circuit 
examples explain typical applications of the products and do not guarantee the success of any 
specific mass-production design. 

- The use of the information described herein for other purposes and/or reproduction or copying 
without the express permission of SIC is strictly prohibited. 

- The products described herein cannot be used as part of any device or equipment affecting the 
human body, such as exercise equipment, medical equipment, security systems, gas equipment, 
or any apparatus installed in airplanes and other vehicles, without prior written permission of SIC. 

- Although SIC exerts the greatest possible effort to ensure high quality and reliability, the failure or 
malfunction of semiconductor products may occur. The user of these products should, therefore, 
give thorough consideration to safety design, including redundancy, fire-prevention measures, and 
malfunction prevention, to prevent any accidents, fires, or community damage that may ensue. 

 

 

Summary of Contents for RE31



















Reviews: