User Instructions Cont’d
BATTERY OPERATION:
To operate your lights using our optional Li-ion
Mobile Power Center Battery, simply plug the 10ft Power Cable into the
green output port of the Battery (instead of the AC Adapter shown in
Diagram 1 above). Then quick press the Battery’s power button to turn
on any connected light(s). Gently press and hold (long press) the power
button to turn-off. You may link/power up to 4 lights at once using our
Battery. Please refer to the Quick Start Guide included with each Battery
for additional important information (charging, storage, fuel gauge, etc).
For more information please visit our website at:
siliconlightworks.com
Thank you for your business!
Silicon Lightworks
800-926-3520
ARM ANGLE ADJUSTMENT:
To
adjust the arm angle of your light,
simply loosen the Phillips-head set
screw located at the light's base and
adjust the arm to a desired angle.
Once adjusted, tighten the set screw
to lock the new angle into place.
LIGHT ATTACHMENT:
On every
bracket or clamp you will find an
18mm wide track that pairs with the 2
opposable guide rails found at the
base of every light. To attach a light to
a bracket or clamp, simply slide the
opposable guide rails onto the 18mm
track, which will secure the light in
place.
