Innovative Solar Solutions | 2917 State Hwy 7, Bainbridge, N.Y. 13733 | Ph: 800.786.0329 | www.SiliconSolar.com
96LED Solar Security & Flood Light
Operation & Installation Instructions
1. PARTS CONTAINED
1) Solar panel box (1pc)
2) Double flood light with sensor (1pc)
3) Twin wire connected to flood light (1pc)
4) Screw and wall plug (1pc)
2. INSTALLATION
The light can be installed in following steps:
2.1 Installation of solar panel box
1) Choose a place where sunlight is abundant during daytime
The solar panel box
MUST
be installed in a location where it can receive maximum sunlight during
daytime hours. Any cover that shades the panel will affect its ability absorb sunlight and decrease the
amount of power and duration of the flood light. The selected location should not be near a night time
light source such as porch lights, street lights, etc.
2) Installation of wall mounting bracket
Fix the wall mounting unit to an appropriate surface by using provided screws and drywall anchors, and
then cover the screws by provided black caps.
2.2
Installation of flood light
1)
Choose a place you need to illuminate at night.
2)
Mount the light by using provided screws.
3)
Readjust the angle of the motion sensor by using the joint.
4)
Readjust the angle of light head as needed.
5)
Loosen the wire and insert the plug into the jack positioned at the bottom of the solar panel box
2.3
Loose the wire and insert the plug into the jack positioned at the bottom of the solar panel box.
2.4
After installation finished, turn ON the switch positioned at the bottom of solar panel box.
Your installation is now complete. Your security light will function automatically from now on.
