manualshive.com logo in svg

Silicon Laboratories UG291, User Manual

Share
Download
Silicon Laboratories UG291 User Manual Download Page 17

5.  Reconfiguring the Wi-Fi Module Firmware

The WGM110 Wi-Fi Module has several hardware interfaces that can be enabled, including the SPI slave interface, the USB device,
and the micro-SD card. To configure the module's hardware interfaces, the module firmware needs to be recompiled and re-program-
med.

The Mini Simplicity connector on the Wireless EXP Board provides a Serial Wire Debug interface to the WGM110 module, which can be
used to upload the reconfigured module firmware. Alternatively, the Device Firmware Update protocol (DFU) can be used to update the
firmware over the UART or SPI interface.

5.1  Building the Module Firmware

Configuring the hardware interface settings of the WGM110 can be done using either the BGBuild command line tool, or the GUI based
BGTool. 

UG161:  WGM110  Wi-Fi  Module  Configuration  Guide

  explains  in  detail  how  to  configure  the  hardware  interfaces  of  the

WGM110 Wi-Fi Module.

UG291: WGM110 Wi-Fi® Expansion Kit User's Guide

Reconfiguring the Wi-Fi Module Firmware

silabs.com

 | Building a more connected world.

Rev. 1.0  |  17

Summary of Contents for UG291
























Reviews:

No comments

Brands by name

Popular brands

Load more brands