5.3 Bluetooth Module Reset
The BGM113 Bluetooth Module can be reset by a few different sources:
• A user pressing the RESET button.
• The on-board debugger pulling the
#RESET
pin low.
• An external debugger pulling the
#RESET
pin low.
In addition to the reset sources mentioned above, the Board Controller will also issue a reset to the BGM113 when booting up. This
means that removing power to the Board Controller (plugging out the J-Link USB cable) will not generate a reset, but plugging the cable
back in will, as the Board Controller boots up.
UG187: Blue Gecko Wireless Starter Kit with BGM113 Module
Power Supply and Reset
silabs.com
| Smart. Connected. Energy-friendly.
Rev. 1.00 | 9
