3.7 EFM32GG12 Reset
The EFM32GG12 MCU can be reset by a few different sources:
• A user pressing the RESET button
• The on-board debugger pulling the #RESET pin low
• An external debugger pulling the #RESET pin low
In addition to the reset sources mentioned above, a reset to the EFM32GG12 will also be issued during board controller boot-up. This
means that removing power to the board controller (unplugging the J-Link USB cable) will not generate a reset, but plugging the cable
back in will, as the board controller boots up.
UG371: Thunderboard EFM32GG12 User's Guide
Hardware
silabs.com
| Building a more connected world.
Rev. 1.0 | 9
