S i 5 3 4 2 - E V B
8
Rev. 1.0
9. Installing ClockBuilderPro (CBPro) Desktop Software
To install the CBOPro software on any
Windows 7
(or above) PC:
Go to
http://www.silabs.com/CBPro
and download ClockBuilderPro software.
Installation instructions and User’s Guide for ClockBuilderPro
can be found at the download link shown above.
Please follow the instructions as indicated.
10. Using the Si5342 EVB
10.1. Connecting the EVB to Your Host PC
Once ClockBuilderPro
software is installed, connect to the EVB with a USB cable as shown below.
Figure 7. EVB Connection Diagram
10.2. Additional Power Supplies
Although additional power (besides the power supplied by the host PC’s USB port) is
not
needed for most
configurations, two addi5 VDC power supplies (MAIN and AUX) can be connected to J33 and J34 (located
on the bottom of the board, near the USB connector). Refer to the Si5342-EVB schematic for details.
