S i 4 8 4 4 - B - D E M O
12
Rev. 0.1
4.2.2. MCU Setting Radio Working Mode
The host MCU can set the radio working mode.
The working modes include:
Tone/volume mode (only for FM), item 3 in setting menu
Tuning preference (only for FM and SW), item 4 in setting menu
Forced mono audio/ST audio (only for FM)
Follow these procedures to set radio working mode:
1. Press the SETTING button to enter item 3. The LCD displays the item number st3 for 1 second, then
automatically switches to its mode indication.
2. Press the DOWN/VOL– or UP/VOL+ button to select the desired mode within 3 seconds.
3. Repeat steps 1 and 2 to set the tuning preference by setting the item 4.
4. When the radio working mode is set, the MCU automatically quits the setting menu if there is no operation
within 3 seconds.
5. Press the MONO/ST button to select forced mono audio or ST audio in FM mode when necessary.
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from