A N 7 4 6
16
Rev. 0.1
5.2.2. Continuous Wave Transmission (CW_Transmit)
Since the radio configuration happened according to the empty project, the only remaining task is to start the CW
mode transmission with the Si4012_Start_CW_Mode() function. Having done the radio configuration, the
transmission will start shortly thereafter.
To illustrate how to expand the code with dynamic behavior,
SM_STEP2
provides the user with a clear example of
how to use the LCD baseboard push-buttons for turning in/out the CW transmission. After starting the CW mode,
an LED on the RF Pico board will turn on, indicating that the mode is successfully activated. By pushing the second
button, the user can stop the transmission with the
Si4012_Stop_CW_Mode()
function. By pushing the first button,
the transmission can be restarted again.
Summary of Contents for Si4012
Page 14: ...AN746 14 Rev 0 1...
Page 18: ...AN746 18 Rev 0 1...
Page 29: ...AN746 Rev 0 1 29 NOTES...
