C P 2 11 2 - E K
6
Rev. 0.3
7.
To read data from an EEPROM or similar device (addressed mode):
a. Click the
Data Transfer
tab.
e.
Enter the slave address, the number of address bytes in the target address, the target address of the SMBus device
being read (in hex), and the number of bytes to read in the
Addressed Read Request
box.
f.
Click the
Address Read Request
button.
g.
To see the number of bytes that were read back, click
Get Read/Write Transfer Status
and verify the number of
bytes read at the bottom of the application.
h.
Click
Force Read Response
and then
Get Read Response
until the application reads back the total number of
bytes. The bytes will be shown in the
Received Data
field. The status bar of the application displays the current
status of the CP2112.
Figure 5. Performing an Addressed Read using the Example Application
7a
7d
7b
7c
7e
