Check the Version
After connecting the board to the PC and opening the terminal program, press the [
[RESET]
] button on the board. You should see a
header with the version information for the device. Ensure this version is 2.1.5 or newer. If you find you are using an older version of
firmware, perform an over the air update on the board as described on docs.silabs.com.
help
The [
help
] command provides information both for commands and variables on the device.
Variables are system-level variables that determine the configuration of the AMW007 module.
Commands are actions that can be taken.
1. Type [
help
] to see the options for the help command.
2. Type [
help commands
] to see a list of commands supported by this module.
Figure 1.1. help
Commands used:
•
https://docs.silabs.com/gecko-os/latest/cmd/commands#help
UG370: Wireless Xpress AMW007 Kit User's Guide
Getting Started
silabs.com
| Building a more connected world.
Rev. 1.1 | 3
