26
007-4988-001
1: SGI InfiniteStorage NEXIS 2000 Quick Start
Figure 1-22
Securing the Front Screws on the Disk Enclosure
1.
Insert one M5 screw through the bottom hole of a flange on the disk enclosure so that the
screw goes through the rack rail and engages the bottom captured nut in the support rail.
2.
Tighten the screw.
3.
Repeat for the second flange.
4.
Secure the rear of the disk enclosure to the support rail by inserting one M4 screw through
the side sheet metal of the disk enclosure into the captured nut on the side of the support rail.
5.
Tighten the screw.
6.
Repeat for the other side.
7.
Attach the plastic end caps onto the front of the disk enclosure by:
–
Placing the top of an end cap on the hinge tab that is part of the disk enclosure’s front
mounting flange.
–
Gently pressing on the bottom of the end cap until it snaps into place over the retainer
on the bottom of the disk enclosure’s front mounting flange.
Summary of Contents for InfiniteStorage NEXIS 2000
Page 1: ...SGI InfiniteStorage NEXIS 2000 Quick Start Guide 007 4988 001 ...
Page 4: ......
Page 32: ......
