Silicon Graphics ICE XA Hardware User'S Manual Download Page 67

Page: 67 / 96

ICE XA D-Rack Technical Specifications

007-6399-002

ICE XA D-Rack Technical Specifications

Table 4-1 lists the technical specifications of the SGI ICE XA series D-Rack.

Table 4-1

Tall SGI ICE XA D-Rack Technical Specifications

Characteristic

Specification

Height

82.25 in (208.9 cm) with 2U top

Width

24 in. (61 cm) - optionally expandable

Depth

49.5 in. (125.7 cm) - air cooled; 50.75 in. (128.9 cm) - water cooled

Shipping height/width/depth 88.9 in. (226 cm) x 44 in. (111.8 cm) x 63.75 in. (162 cm)

Weight (full)

~1,874 lbs. (852 kg) approximate (air cooled)



~2,062 lbs. (1,136 kg) approximate (water cooled)

Shipping weight (max)

~2,365 lbs. (1,075 kg) approximate (air cooled)



~2,553 lbs. (1,205 kg) approximate (water cooled)

Voltage range
Nominal
Tolerance range

North America/International
200-240 VAC /230 VAC
180-264 VAC

Frequency
Nominal
Tolerance range

North America/International
60 Hz /50 Hz
47-63 Hz

Phase required

3-phase or optional single-phase I/O rack

Power requirements (max)

34.58 kVA (33.89 kW)

Hold time

20 ms

Power cable

10 ft. (3.0 m) pluggable cords

Important:

The D-rack’s optional water-cooled door panels only provide cooling for the bottom

42U of the rack. If the top of the rack is “expanded” 2U, 4U, or 6U, to accommodate optional
system components, the space in the extended zone is

not

water cooled.

Summary of Contents for ICE XA

































































































Search results

Summary of Contents for ICE XA

Reviews:

Silicon Graphics ICE XA, Hardware User'S Manual, Page: 67 / 96

Search results

Summary of Contents for ICE XA

Reviews: