Installation
4.
Connect one end of the AC power cord to the AC adapter
and the
other end to a properly grounded AC outlet that is easily accessible
and close to the display.
5.
Power on the display, then the system.
6.
If you see the
NO SIGNAL
message, check the signal cable and
connectors.
Note :
If you see the
INPUT SIGNAL OUT OF RANGE
message, check to
make sure your system is set to one of the factory preset modes (see
page A13), or is set to a resolution and refresh rate within the
specification limits of this display.
5
4
Figure 2
Power Cord
Signal Cable
AC adapter
Dsub
2
4
3
5
1
Connecting the Display
A5
