Silicon Graphics C220, User Manual

Page: 14 / 17

English
English-9
Monitor Specifications Notes
Picture Tube Diagonal: 22 inch/550 mm 90
°
deflection, 0.24 mm grille pitch,
Viewable Image Size: 20 inch/508 mm medium short persistence phosphor,
Radius: 50000 mm aperture grille CRT, G-WARAS coating
Input Signal Video: ANALOG 0.7 Vp-p/75 Ohms
Sync: Separate sync. TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Composite sync. (Negative) (TTL Level)
Sync on Green video (Positive) 0.7 Vp-p and sync
Negative 0.3 Vp-p
Display Colors Analog input: Unlimited number of Colors Depends on display card used.
Synchronization Range Horizontal: 30 kHz to 140 kHz Automatically
Vertical: 48 Hz to 160 Hz Automatically
Resolutions Supported 640 x 480 @ 48 to 160 Hz Some systems may not support all
Resolution based on horizontal and 800 x 600 @ 48 to 160 Hz modes listed.
vertical frequencies only 1024 x 768 @ 48 to 160 Hz
1280 x 1024 @ 48 to 127 Hz
1600 x 1200 @ 48 to 109 Hz
1800 x 1350 @ 48 to 98 Hz
1800 x 1440 @ 48 to 92 Hz
1856 x 1392 @ 48 to 95 Hz
2048 x 1536 @ 48 to 86 Hz
Active Display Area Horizontal: 396 mm/15.6 inches Dependent upon signal timing used, and
(Factory Setting) Vertical: 297 mm/11.7 inches does not include border area.
Active Display Area (Full Scan) 406 mm/16.0 inches Dependent upon signal timing used, and
304.6 mm/12.0 inches does not include border area.
Power Supply AC 100-120 V/220-240 V, 50/60 Hz
Current Rating 1.35A @ 100-120 V / 0.65A @ 220-240 V
Dimensions 495 mm (W) x 486 mm (H) x 477 mm (D)
19.5 inches (W) x 19.1 inches (H) x 18.8 inches (D)
Weight 29.3 kg
64.6 lbs
Environmental Considerations
Operating Temperature: +5
°
C to +35
°
C/+41
°
F to +90
°
F
Humidity: 10% to 90%
Storage Temperature: -20
°
C to +60
°
C/-4
°
F to +140
°
F
Humidity: 10% to 90%
Regulations Safety: UL1950 (UL) , CSA C22.2 No.950 (c-UL),
EN60950 (TÜV-GS)
CCC, KETI
EMC: FCC Class-B, DOC Class-B,
EN55022 Class-B, VCCI Class-B,
EN61000-3-2, EN61000-3-3, EN55024
CCC, MIC, BSMI
X-Ray: DHHS, HWC, Röv vom 8.1, 1987
Other: CE-Marking, MPR-II/TCO’91
ISO9241-3, ISO9241-7, ISO9241-8
TCO’95
International E
NERGY
S
TAR
Program
Specifications