Silicon Graphics 1450, Maintenance Manual

Page: 73 / 162

Processors
007-4276-001 57
Figure 3-3 DIMM Orientation in a Memory Module
Note: DIMM slots on the memory module must be installed only in certain
configurations. See the beginning of this section for requirements.
3. Insert the bottom edge of the DIMM into the socket, and then press down firmly on
the DIMM until it seats correctly.
4. Gently push the plastic ejector levers on the socket ends to the upright position.
5. Repeat the steps to install each DIMM.
Processors
Follow the instructions in this section to remove and install a processor, the processor
retention mechanisms, and processor heatsinks.
Caution: You might damage the system if you install a processor that is inappropriate
for your system. Make sure your system can handle the thermal and power conditions of
the newer, faster processor. For exact information about processor interchangeability,
contact your customer service representative.
!