ULTIMATE-BM
REV 3
2
FEATURES
ARM CONFIRMATION / CAR FINDER FEATURE
Press and hold the
‘LOCK’
button after the car is arm. ( 10 Seconds after locking vehicle using remote)
The parking light will blink once and the siren will sound as long as the
‘LOCK’
button is pressed.
AUTOMATIC RE-LOCK AND RE-ARM
•
If the car was unlocked by the transmitter and unattended for a period of 30 seconds, the vehicle will be locked and
re-arm.
•
The re-lock feature will not be initiated if the doors have been opened or the ACC has been turned on during the 30 seconds
period.
•
If the alarm is tripped by the door switches, hood or trunk sensor, and the siren has sounded for 30 seconds, the doors
will be re-locked and the alarm system will rearm after the delay time. This is to prevent the intruder from making
another attempt.
Note: If the door is unlocked and unattended, system will pre-alert the user 10 seconds before the re-lock, by means of
chirping sound. The intensity will increase towards engagement of re-locking.
IGNITION LOCK FEATURE
The central locking will be activated once the ignition key is turned ON and unlock once the ignition key is turn OFF.
DOOR NOT PROPERLY CLOSED WARNING
If any of the doors is not properly closed, the siren will chirp 8 times if the “LOCK” button is pressed.
If all doors are close properly and the Siren still chirps, there might be a problem with your door switch. Promptly get it
checked by qualified mechanics.
If you ignore the 8 chirping sound warning and keep holding the lock button for more than 3 seconds, door will be lock
and alarm will not sense the doors.
ALARM ACTIVATION
•
Door and trunk switches
Upon tripping the door switches, the siren and parking lights will be activated for a full cycle of 30 seconds. The
system will then reset and rearm (after the delay arm timing) - provided none of the doors have been opened. The
status LED will flash in sequence of 3 pulses and memorized.
•
Ignition key
Upon tripping the ignition key, the siren and parking lights will be activated for a full cycle of 30 seconds. The
system will then reset and rearm (after the delay arm timing). The status LED will flash in sequence of 3 pulses and
memorized.
LED STATUS INDICATOR
The red LED displays the status of the alarm system, as well as providing a visual deterrent against theft.
•
When the system is disarmed, the LED is turned off.
•
When the system is armed, the LED flashes at a slow rate (0.5 sec ON and 0.5 sec OFF).
•
In the event the alarm has been tripped during your absence, the LED will flash in a sequence of short pulse (up to 3)
as an indication of the intensity of intrusion, or source of alarm inputs.
THE MANUAL OVERRIDE SWITCH
In the event the transmitter is lost or cannot operate, the system can be disarmed by manual override switch:
•
Turn the ignition key to "ON" position.
•
Press the override switch.
Note: This switch is usually hidden. Please check with the sales/Installation person of its position.
