As a specialist for rimless drilled frames, Silhouette offers the best possible
Solutions also for exceptional glazing situations:
Situation
Solution
Crosscutting of BLS with scalpel requires accuracy and skill.
The BLS-Cutter will simplify and improve this kind of work.
BLS-Cutter
Disc hinges can easily get loose during inclination.
The new tool will relieve the hinges during inclination.
Inclination Lever
When lens drills get too big, the frame fit often gets loose.
In this case drill holes must be drilled out to 1,6 mm and this new
BLS must be inserted. This will fix shaky frames again.
BLS „large“
PLUS-lenses often get thinner than planned. As a result the fixing
pins of the frame part are too long.
The new BLS hides the long pin in the higher BLS-head.
BLS „short“
MINUS-lenses are often too thick for the length of standard-BLS.
The new, extra-long BLS makes glazing of thicker lenses possible.
BLS „long“
2. WHY A NEW SPECIAL GLAZING BOX?
TARGET OF THESE NEW UTENSILES
