11
Appendix
Users Manual SX
Tab
Item
Explanation
Factory
Default
Use AppleTalk
Protocol
Enable/ Disable AppleTalk Protocol operations.
ENABLE
Printer Name
Set the AppleTalk printer name. The name set here
can be seen in the Chooser. The special symbols in
AppleTalk protocol ("="; ":"; "@" and "*") must be
excluded from the string.
PRxxxxxx
(Lower 6 digits
of Ethernet
address)
PostScript Mode
When the PostScript printer supports binary mode,
PostScript data can be sent in binary. Select BCP
or TBCP in accordance with the mode of your
printer. Use TBCP when PS binary data is printed by
a particular printer. Select ASCII (default) when a
printer other than a PostScript one is connected.
ASCII
Zone Name
The print server sets the zone name where it
belongs. If the value is blank, this product will belong
to the default zone, set in the AppleTalk Router
within the network.
*
Appl
eTal
k
Apple Talk Setup
