Silex technology BR-500AC, User Manual

Page: 42 / 128

36
BR-500AC User's Manual
4-2.
Configuration Using Smart Wireless Setup (Push Switch)
The wireless settings can be configured easily using the push switch if your Access Point
supports WPS(Wi-Fi Protected Setup). How to configure the wireless settings using the
push switch is explained below.
- Please check that the Access Point supporting WPS is installed on your network.
- This configuration method is not available if the Access Point is operating in a stealth mode.
- To ensure proper communication during this configuration, please temporarily move the BR-500AC closer
to the Access Point.
- The WPS feature may need to be enabled on your Access Point manually. For details, see the operating
manual that came with your Access Point.
- If a security feature such as MAC address filtering is enabled on your Access Point, disable it temporarily.
- If the SSID filter is enabled on the BR-500AC when Smart Wireless Setup is executed, the SSID filter function
will temporarily be disabled.
- To connect multiple devices using a HUB, use Multi-Client Mode . See 5-1. How to Access Web
Configuration Interface
to change the operating mode.
TIP