SX-808
6 - ENGLISH
LEM International S.r.l. - Corso Monte Cucco 71/A - 10141 - Turin - Italy - VAT IT10762880010 - All Rights Reserved ®
Powering On/Off
To turn on the headset, simply move the
On/Off
Switch in the direction of the word ON
; by doing
so, the LEDs on the pavilions will light up in a
color between Blue, Green or Red, according to
the position of the Channel Selector.
Consequently, to switch off, proceed by
moving
the On/Off Switch in the direction of the
Charging Connector
.
Channel Selection
In order to listen what is being broadcasted by
the Silentsystem ® trasnmitter, it is necessary
to select the same channel on the headphones,
using the
Channel Selector
switch (Pic. 1).
CHANNEL
RGB COLOR
1
BLUE
2
RED
3
GREEN
Batteria e Ricarica
When the built-in battery of the headset is
low
(10% of the remaining charge)
the led on
the earcups will start flashing; it is therefore
recommended to proceed with recharging of
the device.
Proceed by
placing the On/Off Switch in
the direction of the Charging Connector
(Headphones Off).
The headset is recharged using the cable with
proprietary connector (Pic. 2), and
a full charge
requires about 4 hours
, while
the actual time
of use when fully charged is between 8 and 10
hours
, according to the listening volume. During
the charging phase, the LEDs on the earcups
will be switched on and red; when charging is
complete they’ll became green.
It is advisable to recharge the battery in
environments with temperatures between 10 °C
and 30 °C.
Charging in other environments may
not be as effective.
* The charging cable may also come with a single
proprietary connector; this solution depends on the
equipment rented or purchased.
Volume Adjustment
By turning the
Potentiometer
(Pic. 1) it is possible
to adjust the listening volume.
Pic. 2 - Charging Cable
