Silent Witness SW2300, User Manual

Page: 29 / 32

APPENDIX - Upgrade
NOTE: To get the upgrade firmware, please contact your
local distributor.
1. Prepare Firmware
Make a folder called [program] on the SD root folder as shown below,
Copy “XXXXXX_x.x.x.bin” file to the SD card [program] folder.
2. Upgrade SW2300
Insert the prepared SD card to SW2300 unit and turn on
the power.
The Blue & Red LED will quickly blink while the unit is upgrading. It will also
‘beep’ continuously. Upgrading the unit usually takes about 30 seconds.
Warning: Do not turn off the power during upgrading.
If the upgrade fails, the SW2300 unit should be
returned to your local distributor.
Once the upgrading is finished, the unit will automatically turn off and on the power.
Technical Support & Warranty
TECHNICAL SUPPORT
For Technical Support, please contact Silent Witness.
LIMITED WARRANTY
This product is supplied with 1 year warranty. The Warranty excludes
products that have been misused, (including accidental damage) and damage
caused by normal wear and tear. In the unlikely event that you encounter a
problem with this product, it should be returned to the place of purchase.