Silent Gliss Ltd.
0939 Multi room Handheld Controller
: User guide Page 1 of 7
0939 MULTI ROOM HANDHELD CONTROLLER - USER AND SETUP GUIDE
The 0939 controller is a stylish handset with a colour display screen allowing use in multiple rooms,
selectable from the menu, and offers overall or individual control of blinds or curtains within a room. Both
rooms and blinds can be named for ease of use.
The controller is shipped with factory default settings. It will need to be programmed to operate correctly
with the installed system. The 0939 can be configured manually following these instructions or more
normally, the 0939 will be configured by the system installer using the USB interface and programming
software. For information on how to program this way refer to the software Help file.
For clarity this manual refers to blind control only although all aspects are equally applicable to curtain
control.
Switch On –
To turn the 0939 on press any key. A Splash screen will be displayed followed by the startup
menu screen. The unit will automatically start up in either the last room that was used, or in a user selected
“Default” room.
The unit will turn itself off, if inactive, after 20 seconds to preserve battery life (not when in Set-Up mode
).
General Operation –
This section should be read in conjunction with page 5 of this manual ‘Basic Operation
For Curtain & Blind Control’.
On switch on the handset will display either the last room or default room, depending on configuration
(Screen C1). To open/close all blinds in that room press the left/right keys, to stop the blinds at an
intermediate point press the Enter key.
Shortcut Key
Enter
▲
▼
◄
►
Menu
Context keys
All
Sel
Room 4
Select Scenes
▲
▼
USB Connector
Display
