background image

6

1. The LED indicator will provide information on 7 modes of security system operation:

LED is off = Security system is disarmed. (All Models)
LED is flashing = Security system is armed. (All Models)
LED is flashing fast = Automatic arming timer or RF protection mode timer is counting down. (All Models)
LED is on steady = Alarm is in the valet mode. (Ignition key is “on”)
LED flashes once every 5 seconds = Alarm is in the valet mode. (Ignition key is “off”)
LED is flashing in a 2 flash-pause sequence = Tamper warning - security system has been trigger from

the hood/trunk switch or electronic sensor.  

(Applies to 6908A and 6918A Only) 

LED is flashing in a 3 flash-pause sequence = Tamper warning - security system has been triggered  

from an opened door.  
(Applies to 6908A and 6918A Only)

2. The horn/siren will provide information on 3 modes of security system operation:

One horn/siren chirp = Security system is armed. (Applies to 6908A and 6918A but is an

option for 6904A)

Two horn/siren chirps = Security system is disarmed.(Applies to 6908A and 6918A but is an

but is an option for 6904A)

Four horn/siren chirps = Tamper w security system is disarmed. (Applies to 6908A and

6918A only)

Alarm Mode Indicators

Upgrade Options Available From Your Car Dealer (At an Additional Cost)

The 6904A offers 5 upgrade options, and the 6908A and 6918A also offers 5 upgrade options as listed below.

Option #1:

Remote Power Door Lock/Unlock Control (All Models)

Note:

Your vehicle must have an electronic door locking system for this feature to operate.

Installing option #1 will allow the remote transmitter supplied with your Silencer

®

security system to lock and

unlock your vehicle’s doors as it arms and disarms your security system.

Option #2:

Dome Light Illumination (All Models)

Installing option #3 will allow your Silencer

®

security system to turn on your vehicles interior illumination

system at the time the security system is disarmed by the remote transmitter. The interior lighting will remain
on for 30 seconds after the security system is disarmed. Turing on the ignition key will turn off the interior
illumination before 30 seconds.

Option #3:

Chirping Status Indicator (Applies to 6904A Only)

Installing option #3 will give the 6904A security system an audible chirp to indicate when it is armed or
disarmed.

Option #4:

Flashing Parking Light Status Indicator (An Option for 6904A, Standard on 6908A and 6918A)

Installing option #4 on your 6904A security system will allow the 6904A to flash the parking lights in two
different sequences that indicate system armed and system disarmed conditions.

6945RBUM  08/02/00  1:16 PM  Page 6

Summary of Contents for 6904A









Reviews: