MU_S02 LS_EN - S02 LS User Manual (V002)
Page
44
of
62
Copyright© SILENCE Urban Ecomobility
4)
Battery management system (BMS)
This battery has a
BMS
(
Battery Management System
), which controls parameters such as temperature and voltage. It was developed by the SILENCE R&D
team and plays a very important role in balancing the individual charge of each cell and the overall charge of each series of cells, making sure the battery works
at an optimal level.
This system also provides information on the charge level and sets protocols for charge and discharge currents. It also includes an action plan in case of an
irregular battery status, triggering preventive measures in case of power, voltage or temperature spikes or losses, etc.
In short, the BMS is the battery’s “brain”, ensuring optimal performance and safety.
5)
Connecting the charging unit
You can charge your S02 LS battery on the scooter or
separately. Both the scooter and the battery have
an IEC male contact for the power cable. The cable has a female IEC terminal contact and a male Schuko
terminal (commonly used in Spain to connect to the domestic network), and is normally stored in the
compartment under the seat, where the male connector is located. On the battery, it is located on the
back:
Before removing or putting the battery pack on the scooter, make sure it is not charging and that the key is not in the ignition.
