Operating manual - English
Technica EU
8
Copyright Silca 2005
2
TRANSPORT
The TECHNICA EU key-cutting machine is easy to transport and is not hazardous to handle.
The packed machine should be carried manually by at least 2 persons.
2.1
Packing
The packing for TECHNICA EU is designed to ensure safe transportation and protect the machine and all its parts.
It comprises a pallet base (b) to which the machine is attached, and a cardboard box as a cover (a) (fig. 6).
The machine is fixed to the base with screwed down brackets to hold it firm during transport and protect it.
The closed packing is held in place by two straps which hold the cardboard box firmly on the pallet.
Symbols are printed on the outside of the cardboard box to give instructions and warnings for transportation.
Fig. 6
2.2
Unpacking
To remove the machine from the packing box:
1) cut the straps with scissors and remove.
2) raise the top part of the cardboard box.
3) loosen the screws on the front and rear brackets holding the machine on the pallet.
4) use the special spanner to loosen the nuts on the feet by a couple of turns.
5) remove the metal brackets and tighten the nuts on the feet.
6) check the contents of the box, comprising:
- 1 key-cutting machine
- 1 set of documents, including: operating manual, spare parts list and guarantee
- 1 power cable
- 1 tools pouch
2.3
Machine handling
When the TECHNICA EU key cutting machine has been unpacked, place it directly on its workbench; this operation
should be carried out by at least two people. Take care to lift the machine firmly holding the base, and no other
part.
a
b
Keep dry
This side up
Don’t use
Handle with care
