SMART
Remote Programmer
Copyright Silca S.p.A 2017
English
10
By selec ng, with the mouse, the line rela ng to a model, some addi onal informa on about it will appear,
such as:
-
Vehicle informa on
(Brand, Model; Term of validity; Geographical area; Chassis Code)
-
Original remote control informa on
(Frequency, number of bu ons; bu ons func on; Image)
-
ILCO/SILCA remote control informa on
(Remote control code; Number of bu ons; Type;Transponder to be
used for programming and/or cloning; setup code to be used for mechanical duplica on )
Addi onal notes:
The bu on func ons shown below are also available:
This bu on applies
fi
lters entered in Area 1 to display items in Area 2;
This bu on resets all the
fi
lter values in the area 1;
This bu on leads to start the programming stage of the remote control according to the
selected row in Area 2;
Bu on for viewing a blow-up of the radio control image or technical drawing;
This bu on allows you to view the manual procedure;
Icon indica ng that the radio control or transponder can be programmed with the diagnos c
device
Icon indica ng that the radio control/transponder is programmed automa cally
Icon indica ng that the radio control or transponder CANNOT be programmed with the di-
agnos c device
Icon indica ng that a request can be made for the manual procedure to be used to
programme the radio control
Icon indica ng that the radio control/transponder can be programmed.
See IQ (Info Quest) for con
fi
rma on
Note: please do not move the remote control during programming.
