SMART
Remote Programmer
English
5
Copyright Silca S.p.A 2016
USE OF THE MANUAL
This manual has been wri en by the Distributor and is an integral part of the device literature.
The manual gives informa on that the operator should know to use the device safely.
User Manual
This manual should be read carefully by all those using the Smart Remote Programmer. It is essen al for the
proper use and maintenance of the device.
The manual must be kept carefully throughout the life of the device, including the disposal stage. Keep it in a
dry place close to the machine where it is always at hand for the operator.
Distributor ID
The device has an ID plate showing the serial number located on the back under the rubber grip:
Distributor references and device name
Certi
fi
cation references
Serial Number
See Fig.5
Note: remove the rubber grip to see the ID data.
GENERAL WARNINGS
The device is in compliance with the following standards CE and cer
fi
ca ons FCC, IC .
The materials used in manufacture and the components employed in using the device are safe if the device is
used correctly and ensure that the machine complies to current standards.
1 - TO ENSURE PROPER RELIABLE OPERATION PLACE THE SMART REMOTE PROGRAMMER AWAY FROM ANY
SOURCES OF RADIO INTERFERENCE SUCH AS:
- CORDLESS PHONES
- ELECTRIC MOTORS
- NEON LIGHTS
- MODEM WI-FI
2 - PLEASE INSTALL THE SMART REMOTE PROGRAMMER SOFTWARE IN YOUR PC BEFORE CONNECTING THE
USB CABLE, THIS MIGHT TAKE A FEW MINUTES. ( See chapter REMOTE PRE-SETTING )
ONLINE DOCUMENTATION
-
For document updates and to download new updates of the Smart Remote Programmer so ware
please check our website www.silca.biz/www.ilco.us periodically.
Summary of Contents for Smart Remote Programmer
Page 47: ......
