KEY PROGRAMMING
The
key programming stage
will then begin on the vehicle.
-
If a wrong PIN has been entered or there are errors during communication, the display will
show
error message
(see chap. WARNING/ERROR MESSAGES - Operating Manual
SDD/SBB)
-
If the PIN is correct the display will show:
Turn the ignition OFF
insert the key
to program
Press any key...
-
Turn the key to the
OFF position
and insert the key to be programmed.
-
Press any key.
The key have been
stored
Other key to
stored?
- Press
ENTER
to memorize a new key (see
KEY PROGRAMMING
).
ATTENTION:
a maximum of five keys can be programmed, including those already operatinal.
-
Press
ESC
to go to archiving operation - user data.
TESTING THE KEY
ATTENTION: to check that the memorized keys and remote controls work, test that all the remote
controls lock and unlock the car and that the memorized keys start the engine (always
leave an interval of 30-40 sec. between ignitions). If the test is negative, repeat the
operation.
ARCHIVING OPERATIONS - USERS DATA
At the end of the memorizing operations the following message will appear:
Do you want to save
the customer data?
NO
>YES
- Select
YES/NO
and press
ENTER.
-
No
, to return to the IMMOBILIZER function menu.
-
Yes
, to memorize the data relating to the operation completed.
-
Select
ESC
to quit.
22
