ECO Thermostat EP 10A Black
80 000 34 Manual ECO Thermostat EP 10A Black Rev1.1.docx
Connect thermostat top
Information and error messages in display:
•
Cold operation:
Thermostat is ok, but is operating in a cold environment,
below recommended operating temperature. Temperature is
below 0 degrees C.
•
Warning Cold? Check F:
-No floor sensor connected?
-Poor contact floor sensor wiring?
-No floor sensor will be used, solely the air sensor: Menu
selection "Type" must be set to "Air".
-If the sensor measures below -30 C, this message may appear.
•
Over heating:
-Overheating. Check load, connection terminals and thermostat.
Heat regulation is switched off until thermostat has cooled down.
Contact the Sikom dealer
•
Other error messages: Contact the Sikom dealer
Warranty
Sikom AS products are covered by a two year warranty against any
faults due to material flaws or manufacturing errors, which limit or
render useless certain functions described for the product.
The warranty requires the customer to present the original receipt,
with date of purchase and type of equipment clearly readable.
What is covered by the warranty?
During the warranty period, Sikom AS. reserves the right to repair
the product or to replace defective parts with functionally equivalent
parts. If, after several attempts, Sikom AS is unable to correct the
problem, and the product does not work as described in the manual,
Sikom may elect to refund the purchase price or to replace the
product with a functionally equivalent one. All replaced parts and
products become the property of Sikom AS.
What is not covered by the warranty?
Indirect damage to life, health, property, revenue and environment
caused by circuits and appliances connected to the units (install and
use this product responsibly). Costs related to (re)installing,
transporting and dismantling units; recycling may be governed by
special rules.
Damages caused by use outside of the operating conditions
specified in the manual. Malfunctions caused by transport damages.
Any unauthorized repair, modification or disassembly.
Use of non-original parts.
External factors, such as lightning, power supply issues, mobile
network issues, flood damage or fire.
Units with modified, removed or unreadable serial number.
Sikom AS accepts no responsibility for direct or consequential
damages due to faults in the product, incorrect installation or
incorrect use of the product.
Technical specifications:
Manufacturer:……………………………………… Sikom AS, Norway
Article name
……….……………… ECO Thermostat EP 10A Black
Article number
………………………………….………..…… 80 000 34
Model number
………………………………….……… 300-9750V10
Operating temperature:………………….………………. 0 C to +45 C
Power supply:………………………………………… 230 VAC, 50 Hz
Radio:……………………………… Sikom ECO 433.9 MHz , 10mW
Max
load:………………………………………………………………10A
Relay………………………………………………… double pole switch
Regulation:…………………………………..…… P-regulator. 0-100%
Regulation range:……………………………………..…. 5 C to +40 C
Measurement range:………………………………….…. 0 C to +45 C
Approval:………………………………………….………………….. CE
Hereby, Sikom AS declares that the radio equipment type ECO
Thermostat EP is in compliance with Directive 2014/53/EU. The full
text of the EU declaration of conformity is available at the following
internet address: www.sikom.no
Contact information
Sikom AS
Phone:
+47 740 85 960
Neptunveien 6
E-mail:
N-7652 Verdal, Norway
Web:
