Siko MS100/1, Translation Of The Original Installation Instructions, Page: 15 / 24

MS100/1
Identification English
MS100/1 · Date 27.04.2018 · Art. No. 82106 · Mod. status 118/18
15
External magnetic fields
Failures and data loss occur if strong magnetic fields influence the internal
measuring system.
` Protect the magnetic sensor from impact by external magnets.
3 Identification
Please check the particular type of unit and type number from the identifi-
cation plate. Type number and the corresponding version are indicated in
the delivery documentation.
e. g.
MS100/1
-
0023
variant number
type of unit
The magnetic tape is identifiable by a consecutive imprint.
e. g. MBxxxx GEK WT RP NNNNNN
batch number
reference point
material carrier tape
accuracy
MB type
4 Installation
4.1 Mechanical mounting
Magnetic sensor failure
` When mounting pay attention to the IP type of protection (see chap-
ter
8
.
` Do not open the sensor yourself.
` Avoid blows to the unit.
` Make any changes to the unit.
` The cable must be provided with strain relief. If necessary use drag
chain or protective sleeve.
Loss of measured values
` The tolerances and distance dimensions must be observed over the
whole measurement length.
Exemplary sensor figures are valid for all sensor types unless described
separately.
CAUTION
CAUTION
NOTICE
NOTICE