VT...40
Installation in piping
Technical changes reserved
- 25 -
4
Installation in piping
Now you can install the flow sensor in the piping system which was prepared according to § 3.
Note:
•
Use only a suitable compound for sealing.
If you seal the male thread, take care that no fibrous sealing compounds get into the
turbine (hemp or Teflon strip).
At first screw-in the connecting adaptors into the tube.
Now install the turbine. Make sure that the provided seals fit properly and tighten the un-
ion nuts.
You can also install the Turbotron in piping without connecting adapter.
A later removal, e.g. for cleaning, is hardly possible.
