Related Functions
UM RTD.2
- 22 -
© SIKA
•
Ba_UMRTD.2_en
•
01/2019
Repeat this operation for all the calibration points (maximum of 4).
To delete a line, select it then use the
key.
To edit a line, select it then use the navigation key (
) to make editing possible.
•
Confirm using the
VAL
key to return to the measurement screen.
To ensure the measurements are made using the calibration coefficients defined earlier, go to the
Configuration/Function
menu.
•
In the
Sensor
field, select sensor1 (SONDE1-SENSOR1 below).
NOTE:
The calibrated sensors are at the top of the list and their name is preceded by a *.
•
Confirm the latter using the
VAL
key.
The chosen calibrated sensor is displayed in the measurement screen.
Name of calibrated
sensor used
