Construction
SolarTemp 850 / 851
- 20 -
© SIKA • Ba_SolarTemp850_851 • 04/2022
3 Construction
Housing with seal and mounting screws.
LCD digital display for the measured values.
Solar cell.
Sensor input: socket M12x1.
Transmitter output (SolarTemp 850 optional):
connector M12x1.
Mounting plate.
4 Installation
The SolarTemp 850 / 851 can be separately mounted from the measuring point in a visible
and easily accessible location. It independently operates from its installation position.
The LCD digital display has been optimised for a so-called 6 o’clock viewing angle. The high-
est display contrast is achieved by viewing from the lower front.
Installation details:
•
The installation location should be sufficiently bright and accessible.
•
Observe the measurements and installation dimensions (
p. 29).
•
Mount the SolarTemp 850 / 851 at least at eye level.
4.1 Mounting
Choose a suitable location with sufficient
space.
Provide a suitable substructure with match-
ing bores for the SolarTemp 850 / 851.
Install the substructure on the installation
site.
Install the SolarTemp 850 / 851 with match-
ing screw connections on the substructure.
Mounting example with substructure on a
cooling water supply line.
