9
Ulead VideoStudio Software Installation
The
USB 2.0 + 1394 DV Kit
includes Ulead
®
VideoStudio
TM
digital video editing software for producing home videos
complete with attractive titles, transitions and sounds.
Before installing VideoStudio, make sure your adapter
and DV camcorder are properly installed and configured.
See next section,
Connecting DV Camcorder
,
for more
details on how to properly install your DV camcorder.
1.
Insert the Ulead VideoStudio DV software CD. Auto-
run should start automatically. If not, click
Start
,
Run
, type in
X:\Setup.exe
, then click
OK
. (Change
X:
to match your CD-ROM drive letter).
2.
Select a language, click
Next
and follow on-screen
instructions to complete installation.
Note:
For instructions on how to use
Ulead
VideoStudio
, please refer to
VStudio.pdf
file
located in the
Manual
directory on the Ulead
VideoStudio DV software CD.
Connecting DV Camcorder
Before setting up the digital video camcorder, make sure
to verify the driver for the adapter has been successfully
installed in your system and follow the setup procedures
listed below.
1.
Boot up your system.
2.
Connect the 4-pin connector of the provided
FireWire (1394) 6-pin/4-pin DV cable into your
digital camcorder, and connect the 6-pin connector
into an available port on the 1394 adapter. Power on
the camcorder. The camcorder should now appear
in
Device Manager
.
