4
2.
Autorun should start the installation. If
Autorun does not start, click Start, then
Run. Type D:\Autorun.exe, then click
OK. (Change D: to match your CD-ROM
drive letter)
3.
Click Install Device, follow on-screen
instructions to install the driver, then
restart Windows.
4.
Connect the reader/writer to a USB port
and the drivers will load automatically.
Windows 2000
Windows 2000 with service pack 2 or earlier:
Do not connect the reader/writer until after
the driver has been installed.
1.
Boot up your system and insert the driver
CD.
2.
Autorun should start the installation. If
Autorun does not start, click Start, then
Run. Type D:\Autorun.exe, then click
OK. (Change D: to match your CD-ROM
drive letter)
