3
• Do not expose the hub to high humidity, high temperature,
direct sunlight, excessive dust/moisture, or strong magnetic
field.
• Do not touch the hub or cable with wet hands to prevent any
electric shock. Should the hub becomes wet, unplug it from
it's power source before handling.
• Any modifications done to the hub by unauthorized
personnel will result in voiding the warranty.
• Any damage, electric shock, fire or loss of function
resulting from any unauthorized modifications done to the
hub will not be the responsibility of the manufacturer.
• Always back up data periodically. Any error or loss of data
will not be the responsibility of the manufacturer.
Installation
Important:
In order for this USB 2.0 SlimHub 4000P to work
properly, the driver for your existing USB 2.0 host adapter has to
have support for USB 2.0 hub. However, USB 2.0 host adapters
sold earlier than January 2002 may not come with driver which can
support USB 2.0 hub. Please contact your USB 2.0 host adapter
manufacturer if you are not sure about this. In most cases, they
should have an updated driver for you to download.
Assuming your USB 2.0 adapter is correctly set up with the correct
driver, this hub should automatically be detected and installed
when connected.
Windows 98 SE/ME/2000/XP Installation
1. Insert the power adapter into the power jack in the back of
the hub.
2. Boot up to Windows and connect the hub's USB cable to an
available USB 2.0 port in your system.
3. Windows 98 SE/ME/2000/XP automatically detects and
installs the correct driver for this hub.
4. The USB hub is now ready for device connection. Please
refer to your device's manual for installation procedure.
