6
Existing Windows XP/Server 2003 Installation
1.
Install the board and boot up Windows XP/Server
2003.
2.
At the Found New Hardware Wizard, Insert the
driver CD, select Install the software automatically
(Recommended), then click Next.
3.
Click Finish.
4.
Restart Windows to complete the driver installation.
To Verify Windows 2000/XP/2003 Installation
1.
Right click My Computer and click Manage.
2.
Select Device Manager.
3.
Double click SCSI and RAID Controllers, then
double click Silicon Image SiI 3132 ... Controller to
display driver properties.
Hot-Plugging Hard Disk Drives
To remove a drive from a powered up system, do the
following:
1.
Right click My Computer and click Manage.
2.
Select Device Manager.
3.
Click Disk Drives, right click the target disk and
select Disable/Enable.
4.
You can now remove the target disk.
Bios Configuration
The SATA II PCIe i/e BIOS will appear everytime your
system starts up. If the bios doesn't show, please try your
controller in another PCIe slot. During the (Post) process,
the bios will show up and indicate the devices attached
to it.
