4
2.
Restart your system when prompted during
Windows' installation.
3.
At the
Windows 2000 Setup
screen, press
F6
to
install the driver.
4.
Insert the driver
diskette. Press
S
, then press
Enter
.
5.
Select
INITIO INIC1620 S-ATA Adapter For
Windows 2000
and press
Enter
.
6.
Press
Enter
to continue and follow on-screen
instructions to complete the installation.
Existing Windows 2000 Installation
1.
Install the board and boot up Windows.
2.
At the
Found New Hardware Wizard
, click
Next
.
3.
Select
Search for a suitable driver for my device
(recommended)
and click
Next
.
4.
Insert the driver CD, check
CD-ROM drives
, uncheck
the other boxes, and click
Next
. Click
Next
again to
continue.
5.
Click
Yes
, then click
Finish.
Note
: Our driver has been thoroughly tested in
Windows for stability.
6.
Restart Windows to complete the driver installation.
Windows XP/Server 2003
New Windows XP/Server 2003 Installation
A new installation of Windows XP/Server 2003 requires
a floppy disk for the driver installation. To make this
floppy disk, copy the
contents
of the
Floppy
folder,
found on the driver CD, onto a blank floppy disk then
follow the directions below.
1.
Install the board and follow the Microsoft
procedures to install Windows accordingly.
