SIIG NN-EC2812-S1, Quick Installation Manual

Page: 8 / 12

8
Connecting Devices
General driver installation steps are provided below.
Please review your device's user manual for more details.
Windows 2000
1. At the Found New Hardware Wizard, click Next .
2. Select Search for a suitable driver ..., then click Next .
3. Uncheck all check boxes, then click Next .
4. Click Next , then click Finish .
Windows XP
1. At the Found New Hardware Wizard.
For XP w/SP2 or later : Select No, not this time , then
click Next .
For XP w/SP1 or earlier : Go directly to step #2.
2. Select Install the Software Automatically , click Next .
3. Click Continue Anyway . (Skip if not prompted)
4. Click Finish to complete the installation.
Server 2003
1. At the Found New Hardware Wizard.
For 2003 w/SP1 or later : Select No, not this time , then
click Next .
For 2003 no service pack installed : Go to step #2.
2. Select Install the Software Automatically , click Next .
3. At the Security Alert box click Yes , or the Hardware
Installation box click Continue Anyway , then click
Finish to complete the installation.