3
Software Installation
This section provides information on how to install the
FireWire 800 CardBus Dual
driver/software.
Windows 98SE
1.
At the
Add New Hardware Wizard
, click
Next
.
2.
Select
Search for the best driver for your device
(Recommended)
, then click
Next
.
3.
Insert the driver CD, check
CD-ROM drive
, uncheck
the other boxes, then click
Next
.
4.
Click
Next
, then
Next
again.
Note
: If prompted for the
Windows 98SE
CD, type in
the drive letter of your CD-ROM, then click
OK
.
5.
Click
Finish
and restart Windows to complete the
installation.
Windows ME
1.
At the
Add New Hardware Wizard
, insert the driver
CD, select
Specify the location of the driver
(Advanced)
, then click
Next
.
2.
Select
Specify a location
, uncheck the other box,
type
D:
, then click
Next
. (Change
D:
to match the
drive letter of your CD-ROM)
3.
Click
Next
,
Next
, then
Finish
.
4.
Restart Windows to complete the installation.
Windows 2000
Windows 2000 automatically installs it's built-in 1394a
driver. To get the full speed out of this controller, install
the Firewire 800 driver using the directions below.
