3
Figure 2: 2-Port fanout cable
Hardware Installation
General instructions for installing the card are provided
below. Since the design of computer cases and
motherboards vary, refer to your computer’s reference
manual for further information, if needed.
Static Electricity Discharge may permanently damage
your system. Discharge any static electricity build up in
your body by touching your computer’s case for a few
seconds. Avoid any contact with internal parts and
handle cards only by their external edges.
1.
Turn OFF the power to your computer and any
other connected peripheral devices.
2.
Unplug the power cord from the computer, then
remove your computer’s cover.
3.
Remove the slot bracket cover from an available
PCIe slot.
Board connector
9-pin
serial
2-Port Fan-out Cable
