2
Hardware Installation
General instructions for installing the card are provided below, since
the design of notebook computers may vary. Refer to your system’s
reference manual for further information, if needed.
1. Power off your notebook computer and any other connected
peripheral devices.
2. Insert the PC Card into the PC Card slot of your notebook
computer with its 68-pin connector facing the slot. Make sure
it is inserted all the way in for a solid connection.
3. Plug the RJ45-to-9-pin serial port cable into the Single-Serial PC
Card.
4. Power on your notebook computer.
Figure 1. Inserting PC Card
Software Installation
Throughout driver installation, you may be prompted to insert your
Windows installation CD. Some files on this CD are neccessary to
complete the driver installation. Please insert the CD when
prompted and follow on-screen instructions.