6
13. Select The Updated driver (Recommended), click
Next
, click Next again.
14. At the insert disk box, click OK, type D:, click
OK
, then click Finish. (Change D: to match your
CD-ROM drive letter)
15. Click Yes to restart to complete the installation.
Windows ME
1.
Install the board, boot up your system, and insert
the driver CD.
2.
When PCI standard PCI-to-PCI bridge is detected,
select Automatic Search for a better driver
(Recommended)
, click Next, then click Finish.
3.
When the 1394 Host Controller is detected,
Automatic Search for a better driver
(Recommended)
, click Next, then click Finish.
4.
When the PCI Ethernet Controller is detected,
choose Specify the location of the driver
(Advanced)
, then click Next.
5.
Check Specify a location, uncheck the other box,
type D:\LAN\ME, click Next, Next, then Finish.
(Change D: to match your CD-ROM drive letter)
6.
Click Yes to restart Windows.
Note:
When Windows resumes, if prompted to
restart, click Yes.
